|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
Agilent / HP
|
44470D
|
Agilent / HP 44470D 20 Channel Relay Mux Module
|
$950.00
|
|
|
The Agilent 44470D multiplexer module provides 20 channels to switch both high and low input signals to a common bus. It can switch signals up to 250V, 2A, and 60W, or 125VA per channel. This module exhibits low thermal offset characteristics, making it ideal for precision low-level signal routing. It can be operated in either a break-before-make mode or multiple channels close mode. You can make four-wire ohm measurements by programming two Agilent 44470Ds to open/close in the card pair mode. A screw terminal block is provided for ease of wiring.
Standard Product Includes:
44470D 20-Channel Multiplexer Module
1 Connection Terminal
Features
Designed for low channel count application
Switching up to 2A, 250V
|
| |
| |
Agilent / HP
|
44471D
|
Agilent / HP 44471D General Purpose Relay Module
|
$890.00
|
|
|
The Agilent 44471D is a 20-channel 1-wire general purpose relay module. It can be used to control DUT power, to actuate external relay or to form an attenuator. Each relay on the module is rated for switching up to 250V, 1A, or up to 60W or 125VA. The initial closed channel resistance is lower than 1 Ohm. The Agilent 44471D exhibits low thermal characteristics, making it ideal for independent signal switching. A screw terminal block is provided for ease of wiring.
Standard Product Includes:
44471D 20-Channel General Purpose Relay
1 Connection Terminal
Features
Switching up to 1A, 250V
High isolation for mV level signal switching
|
| |
| |
Agilent / HP
|
44472A
|
Agilent / HP 44472A Dual 1x4 VHF Multiplexer(300MHz, 50 Ohm)
|
$675.00
|
|
|
The Agilent 44472A VHF module offers broadband switching capability for high frequency and pulse signals. Two independent 50 Ohm character impedance bi-directional 1x4 switches are provided for signals from DC to 300 MHz. Very low crosstalk makes the VHF module ideal for VHF signal measurements using spectrum, network, or distortion analyzers. You can also use the excellent signal integrity of the VHF module for multiplexing inputs to your GPIB oscilloscope or waveform analyzer. Each group of four channels is isolated from the other and from the chassis to prevent ground loops. BNC connectors provide ease of connection to the module.
Standard Product Includes:
44472A Dual 1x4 VHF Multiplexer Module
1 Connection Terminal
1 Certificate of Verification
Features
DC to 300MHz
BNC connectors for ease of wiring
For complete details, click on the Data Sheet link.
|
| |
| |
Agilent / HP
|
44476A
|
Agilent / HP 44476A Microwave Switch Module
|
$1,250.00
|
|
|
Agilent / HP 44476A Microwave Switch Module Furnishes 3 independent SPST 50ohms coaxial switches with excellent performance from DC to 18GHz 3mm SMA connectors For use with 3488/99A/B. |
| |
| |
Agilent / HP
|
44478B
|
Agilent / HP 44478B Dual 1x4 RF Multiplexer Module (1.3GHz, 75 Ohm)
|
$875.00
|
|
|
The Agilent 44478B Multiplexer Module is an ideal choice for broadband switching of high frequency or fast pulse signals. Dual 1-to-4 multiplexers provide bi-directional switching of signals from DC to 1.3GHz. High channel isolation (>55 dB at 1 GHz) assures quality dynamic-range measurements using spectrum, network, or distortion analyzers. Each 1-to-4 multiplexer consists of seven relays in a "tree" structure, which provides high isolation and low VSWR (voltage standing wave ratio). All the connectors on the module's edge are female BNC for ease of wiring. Off-channels can be terminated in resistors to maintain proper operation of DUT circuitry. Simply plug a 50/75 Ohm SMB type resistive termination onto the on-board male SMB connector provided for each channel.
Standard Product Includes:
44478B Dual 1x4 RF Multiplexer Module
1 Connection Terminal
Features
Switching up to 1A, 24W or 24VA
Insertion loss less than 1.9dB at 1.3GHz
Maximum Scan Rate: 43 Chans/sec
Maximum Voltage: 42V, DC+AC peak
Maximum Current: 1A
Maximum Power:
Per channel: 24W, 24VA or 44dBm
Characteristic Impedance: 75 Ohm
|
| |
| |
Agilent / HP
|
34825A
|
Agilent / HP 34825A BenchLink Data Logger II Software for 34970A
|
Contact Sales
|
|
|
Easy spreadsheet-like test setup
Real-time display and analysis of measurements
Store data or export to other applications
Monitor multiple channels over a specified time period
Set alarms
Use with up to 4 instruments
Analyze and graph results |
| |
| |
Agilent / HP
|
3488A
|
Agilent / HP 3488A Switch/Control Unit
|
$180.00
|
|
|
The Agilent 3488A switch/control unit brings versatile, GPIB programmable switching to tests requiring multi-channel measurements. The Agilent 3488A provides signal switching with the integrity and isolation needed for high-performance production test systems. It also offers a flexible, low-cost interconnection for automating experiments on the bench and for developing tests in the lab. The Agilent 3488A is designed to hold up to five of the following switch and control modules:
10-channel relay multiplexer (opt 010)
10-channel general purpose relay (opt 011)
Dual 4-channel VHF switch (opt 012)
4 x 4 matrix switch (opt 013)
16-bit digital input/output (opt 014)
Breadboard (opt 015)
3-channel 18 GHz switch (opt 016)
7-channel form-C relay (opt 017)
2-channel microwave switch (opt 018)
1.3 GHz 50 and 75 ohm multiplexer (opt 019, opt 020)
Features
DC to 26.5 GHz signal switching
Up to 50 channels
Matrix, multiplexer, and general purpose relays
40 configuration storage registers
Digital I/O control and actuation
11 switch and control modules
|
| |
| |
Agilent / HP
|
34901A
|
Agilent / HP 34901A 20 Channel Multiplexer Module
|
$350.00
|
|
|
20 Channel Multiplexer
60 ch/s scanning
Two- and four-wire scanning
Built-in thermocouple reference junction
300 V switching
|
| |
| |
Agilent / HP
|
34902A
|
Agilent / HP 34902A 16 Channel Multiplexer (2/4-wire) Module
|
$460.00
|
|
|
16 Channel Multiplexer
250 ch/s scanning
Two- and four-wire scanning
Built-in thermocouple reference junction
|
| |
| |
Agilent / HP
|
34903A
|
Agilent / HP 34903A 20 Channel Actuator/General Purpose Switch
|
$320.00
|
|
|
20 Channel Actuator/GP Switch
SPDT (Form C) latching relays
300 V, 1 A actuation and control
|
| |
| |
Agilent / HP
|
34906A
|
Agilent / HP 34906A Dual 4-Channel RF Multiplexer, 75 OHM Module
|
$495.00
|
|
|
Dual 4 Channel RF Multiplexer
2 GHz bandwidth, 75 Ohm
BNC to SMB adapter cables included |
| |
| |
Agilent / HP
|
34907A
|
Agilent / HP 34907A Multifunction Module
|
$260.00
|
|
|
The Agilent 34907A module for the 34970A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs - all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Digital Input/Ouput
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Totalize Input
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Analog Output
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
16 bits of digital input and output
100 kHz totalizer input
Two +/-12V analog outputs
|
| |
| |
Agilent / HP
|
34908A
|
Agilent / HP 34908A 40 Channel Single-Ended Multiplexer
|
$415.00
|
|
|
40 Channel Single-Ended Multiplexer
60 ch/s scanning
Single-wire switching for common-low applications
Built-in thermocouple reference junction
|
| |
| |
Agilent / HP
|
34970A
|
Agilent / HP 34970A Data Acquisition/Switch Unit
|
$950.00
|
|
|
HP / Agilent 34970A Data Acquisition/Switch Unit |
| |
| |
Agilent / HP
|
3499A
|
Agilent / HP 3499A 5-Slot Switch/Control Mainframe
|
$1,850.00
|
|
|
The Agilent 3499A can accommodate up to five plug-in modules, routing up to 200 channels in a test system. With various switch modules, it can scan at rates up to 350 channels per second, or open/close 200 channels in less than 0.1 second. The 3499A is compact, requiring only 2U height in a full rack width mainframe unit.
Like the other two mainframes, it has a concise user interface that is extremely useful for manual operation on the manufacturing floor or in desktop applications. High-performance switching modules, multi-function modules, built-in relay cycle counters and easy interconnections all contribute to provide a switching solution you can trust.
Features
Five slots occupying just 2U rack height and full rack width
Intuitive, self-guiding front panel interface
Fast, innovative parallel driving circuits open/close switches simultaneously
Programmable control with either RS-232 or GPIB interfaces.
Easy wiring for simplifying cabling and increasing reliability.
|
| |
| |
Agilent / HP
|
N2260A
|
Agilent / HP N2260A 2-Wire, 40-Channel Multiplexer Module
|
$1,150.00
|
|
|
The Agilent N2260A is high-density re-configurable multiplexer (MUX) module for general production test. It can be operated in either SCPI or 3488A mode. In the SCPI mode, it can be configured in any of the following ways:
one 80-channel, 1-wire MUX
one 40-channel , 2-wire MUX
dual independent 20-channel, 2-wire MUXs
one 20-channel, 4-wire MUX.
A connection terminal is not provided with the N2260A module. Screw terminal block, crimp and insert terminal block, and DIN96-to-D50/25 cables are available separately for ease of wiring.
Features
Re-configurable to 1, 2, and 4-wire mode
Built-in relay cycle counters
Low thermal offset relays: <3uV
Switching speed: 60 channels/sec
|
| |
| |
Agilent / HP
|
N2261A
|
Agilent / HP N2261A 40-Channel General Purpose Relay Module
|
$1,200.00
|
|
|
The Agilent N2261A is a GP relay module, providing 40 independent single-pole-single-throw (SPST) latching relays. Each channel can switch up to 200 V, 1 A, and 60 W or 62.5 VA. Thanks to an innovative driving circuit, 10 switching channels can be operated simultaneously, resulting in high throughput for an automatic test system. It can be operated in either SCPI mode or 3488A mode. A pair of signals can be switched together by using a pair of channels on two N2261A modules. The N2261A can be operated in single channel break-before-make (BBM) or multiple channels open/close mode. A connection terminal is not provided with the module. A screw terminal block, crimp and insert terminal block, and DIN-to-D50/25 cables are available for ease of wiring.
Features
40 independent relays in one module
High speed switching in parallel operation
Built-in relay cycle counters
|
| |
| |
Agilent / HP
|
N2262A
|
Agilent / HP N2262A 4x8 Matrix Switch Module
|
$1,050.00
|
|
|
The Agilent N2262A 4x8 Matrix Module contains 32 cross points organized in a 4-row by 8-column configuration. It provides the most convenient way to connect a group of test instruments to multiple test points on DUTs. Each cross point in the module switches two wires for the high and low of a measurement. Multiple matrix modules can be connected for applications that require large matrices. For example, four N2262As can be combined as a 16x8 matrix. N2262As can be used in conjunction with other modules (such as multiplexer modules) to provide a wide variety of switching combinations. More than one switch can be in the closed state, allowing any combination of rows to be connected to columns. Up to eight channels can be operated in parallel for high speed switching. A connection terminal is not provided with the module. A screw terminal block, crimp and terminal block, and DIN96-to-D50/25 cables are available for ease of wiring.
Features
Multiple inputs connecting to multiple outputs
High speed switching in parallel operation
Built-in relay cycle counters
|
| |
| |
Agilent / HP
|
N2264A
|
Agilent / HP N2264A Multifunction Module (12 + 3 GP + 16-bit Digital I/O)
|
$950.00
|
|
|
The Agilent N2264A multifunction module combines 12 general purpose relays, three high current relays, and a 16-bit digital input/output in one module. The N2264A is designed for applications that require multiple functions in one module for space saving and system cost saving. Its three high current channels are especially useful in automated test systems for cellular phone test or battery test where only two or three high current channels are needed. A connection terminal is not provided with the module. A screw terminal block, crimp and insert terminal block, and DIN96-to-D25/D50 cables are available for ease of wiring.
The 12 general purpose channels are non-latching relays which can switch up to 200 V, 1 A ,60 W or 62.5 VA. The three high current channels are non- latching relays, switching up to 5 A, 125 V DC or 200 V AC RMS. The 16 bits digital I/O provides 16 bi- directional data lines (bits) plus three lines used for control and handshaking. The 16-bit I/O lines are TTL compatible input/output, or TTL compatible input and open collector output up to 42 V. The 16 I/O bits can be addressed individually (bit-by-bit), or as two independent 8-bit ports, or as one 16-bit port. A Zener diode is used in each channel for input voltage over protection (>42V DC), and ESD protection. Each I/O line can sink up to 0.6 A to control external devices.
Features
12 +3 GP +16-bit Digital I/O in one module
High speed switching in parallel operation
Built-in relay cycle counters
|
| |
| |
Agilent / HP
|
N2268A
|
Agilent / HP N2268A Dual 1x4 RF Multiplexer Module (3.5GHz)
|
$2,350.00
|
|
|
The N2268A multiplexer module has two 1x4 independent multiplexers with SMA connectors, delivering high performance, very low insertion loss, high isolation, and excellent VSWR performance. This high-density RF multiplexer module is an economical RF signal switching solution. Its 3.5 GHz bandwidth guarantees signals will not be degraded when switched from source to destination. Each group of four channels is isolated from the other and from the chassis to prevent ground loops. The wide-bandwidth performance enables quality dynamic-range RF signal measurements using oscilloscopes, spectrum analyzers, network analyzers, and GSM/CDMA test sets. Typical test applications include switching signals of Bluetooth transceivers and L1/L2 GPS receivers, 1.8/1.9 GHz wireless communication devices (such as GSM, CDMA, 3G, DCS1800, and PCS1900 base stations), and mobile phones. It can be also used to route satellite signals.
Features
Ideal for wireless communication test
Insertion loss <1.7 dB at 3.5 GHz
|
| |
| |
Agilent / HP
|
N2290A
|
Agilent / HP N2290A Screw Terminal Block for N2260A and N2266A Multiplexer Modules
|
$210.00
|
|
|
The Agilent N2290A is a screw terminal block connection accessory for the N2260A 2-wire, 40-Channel Multiplexer Module or the N2266A 40-Channel High-speed Multiplexer Module |
| |
| |
Agilent / HP
|
N2291A
|
Agilent / HP N2291A Screw Terminal Block for the N2261A GP Relay Module
|
$210.00
|
|
|
The Agilent N2291A is a screw terminal block connection accessory for the N2261A 240-Channel General Purpose Relay Module.
|
| |
| |
Fluke
|
2620A
|
Fluke 2620A Hydra Data Acquisition Unit
|
$1,350.00
|
|
|
Hydra is ideal for applications that require direct connection to a PC for real-time data collection.
Easy-to-use front-end
An RS-232 serial interface makes it easy to connect the Hydra Data Acquisition Unit to a PC or modem for real-time data acquisition. The 2620A can also be used as a 20-channel panel meter.
IEEE interface
An optional IEEE-488 interface easily allows you to integrate the 2620A with other IEEE-488 instruments and your PC. The 2620A delivers workhorse performance for a wide variety of applications such as test and monitoring systems.
|
| |
| |
Fluke
|
2625A
|
Fluke 2625A Hydra Data Logger
|
$2,200.00
|
|
|
A low-cost alternative for stand-alone monitoring operations.
Internal memory
A built-in nonvolatile memory that can store more than 2000 scans.
Flexible data retrieval
The ability to upload stored data or transfer real-time data via modem, or directly to your PC via the RS-232 port.
|
| |
| |
Fluke
|
2635A
|
Fluke 2635A Hydra Data Bucket
|
$2,900.00
|
|
|
The ideal choice for gathering and transporting large volumes of data and for working extended periods from remote locations.
Flexibility
The Hydra Data Bucket comes equipped with a 256 KB PCMCIA card and is also available with either a 1 MB, 2 MB, or 4 MB memory card to suit your data storage needs. Data may be uploaded from these cards via the Hydra RS-232 port, the optional 263XA-803 memory card drive, or from your computer's standard PCMCIA slot. Real-time data can be simultaneously transferred to a PC at the same time it is recorded to the memory card.
Quick setups
Simply push a few front panel buttons or load instrument setups from the memory card.
Fail-safe features
The Hydra Data Bucket gives advance indication of a low battery or low memory condition on the memory card. Its internal memory buffer continues to store up to 70 scans while the card is removed.
|
| |
| |
Keithley
|
7001
|
Keithley 7001 80 Ch - 2 Slot Half Rack Switch Mainframe
|
$850.00
|
|
|
The Model 7001 is a half-rack, high density, two-slot mainframe that supports the widest range of signals in the test and measurement industry. DC switching capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and optical switch support, make the Model 7001 a versatile production test tool for a wide array of applications.
Built-in scan control eliminates the need for the computer to control every step of the test procedure. Simply
Key Features and Benefits:
DC, RF, and optical switch capability
Supports industry's broadest range of signals
Integrates easily with DMM and SourceMeter instruments
Full channel status display
2 card slots
Supports more than 40 switch/control cards
|
| |
| |
Keithley
|
7002
|
Keithley 7002 400 Ch - 10 Slot Full Rack Switch Mainframe
|
$1,850.00
|
|
|
Space-efficient, 400 channel mainframe handles large applications.
10 independent card slots for multiplex, matrix, RF, low-level, and I/O control.
52-char. alphanumeric display provides clear, readable help and information.
165 channel per second scanning for exceptional system throughput
Accepts more than 30 different switch cards for tremendous application versatility.
Interactive front panel status display and optional light pen simplify programming
Built-in scan control and 500-pattern memory eliminate the need for a computer to control every step of a test procedure.
Switch cards offer maximum signal integrity and convenient, high-quality connectors for simplified cabling and increased reliability.
Drivers available for LabVIEW?, LabWINDOWS/CVI?, and TestPoint? to simplify and accelerate test program development.
|
| |
| |
Keithley
|
7012-S
|
Keithley 7012-S 4x10 Matrix Card w/ Screw Terminals
|
$845.00
|
|
|
4 × 10, 2-pole matrix for general current and voltage switching and multiplexing applications.
Multiple configuration options provide easy expansion and great versatility.
Connects to 7001/7002 analog backplane for high signal integrity and minimal intercard wiring.
Excellent isolation, offset, and crosstalk characteristics handle sensitive switching applications.
Available with removable screw terminal board or 96-pin connector |
| |
| |
Keithley
|
7035
|
Keithley 7035 9 Bank 1X4 Multiplexer Switching Card
|
$875.00
|
|
|
Great fit for low frequency telecom test
The Model 7035 9-Bank Multiplexer Card has nine 1x4 multiplexers. The switch contact configuration for each channel is 2-pole form A. The card's nine banks can be combined for a wide variety of switching configurations using external connections. This flexibility makes the Model 7035 well-suited for production testing of a variety of telecommunications products and systems and low power portable devices.
Related Applications:
T1/E1 telecommunication transmission system testing
Modem testing
Industrial sensor and transmitter testing
|
| |
| |
Keithley
|
7058
|
Keithley 705 Low Current Scanner
|
$1,375.00
|
|
|
Keithley 7058 Low Current Scanner Card |
| |
| |
Keithley
|
7052
|
Keithley 7052 Matrix Card
|
$675.00
|
|
|
Keithley 7052 5x4 Matrix Plug-In Switching Card |
| |
| |
Keithley
|
7066
|
Keithley 7066 Relay Switch Card
|
$225.00
|
|
|
Keithley 7066 |
| |
| |
Keithley
|
7067
|
Keithley 7067 4-Wire, 10-Ch Scanner Card
|
$550.00
|
|
|
4-wire, 10-channel scanner handles larger test applications.
High isolation, low contact resistance, and low contact potential maintain signal integrity.
Quick disconnect screw terminal connections speed hookups
|
| |
| |
Keithley
|
7074-D
|
Keithley 7074 - D Eight 1 x 12 General Purpose Mux Card
|
$3,550.00
|
|
|
Keithley Instruments 7074 Eight 1 x 12 General Purpose Multiplexer Card |
| |
| |
Keithley
|
708
|
Keithley 708 Switching Matrix
|
$1,450.00
|
|
|
Optimized for industrial production testing
Requires just 3-1/2 inches of rack space
Low heat producing design - no vent holes or fan needed
Card accessible from either front or rear panel
Front panel relay status display
"One touch" programming
Control up to 96 channels of 2-pole switching (expandable to 480)
Compatible with a wide range of switch cards |
| |
| |
Keithley
|
708A
|
Keithley 708A Switching Matrix
|
$2,250.00
|
|
|
Optimized for industrial production testing
Requires just 3-1/2 inches of rack space
Low heat producing design - no vent holes or fan needed
Card accessible from either front or rear panel
Front panel relay status display
"One touch" programming
Control up to 96 channels of 2-pole switching (expandable to 480)
Compatible with a wide range of switch cards |
| |
| |
Keithley
|
7154
|
Keithley 7154 2-Pole High Voltage Card
|
$475.00
|
|
|
Keithley 7154 |
| |
| |
Keithley
|
7164
|
Keithley 7164 20 Ch Scan Card
|
$375.00
|
|
|
Keithley 7164 |
| |
| |
Keithley
|
7169-KIT
|
Keithley 7169-KIT 20-Pin Mass Term. Connector
|
$38.00
|
|
|
|
| |
| |
Keithley
|
7172
|
Keithley 7172 8x12 Low Current Matrix
|
$3,850.00
|
|
|
Keithley Model 7172 8x12 Low Current Matrix |
| |
| |
Keithley
|
7700
|
Keithley 7700 20-Channel, Differential Multiplexer Module w/ Automatic CJC, Screw Terminals, and up
|
$365.00
|
|
|
20 channels for general-purpose measurements, plus two channels to measure current
Oversize screw terminal connection blocks are standard for easier connections
50MHz bandwidth
300V, 1A capacity for voltage channels; 60W, 125VA
3A capacity for current channels
Low insertion loss of up to 50MHz
Relay closures stored in onboard memory |
| |
