Pacific Test Equipment - Test and Measurement Equipments from HP / Agilent Anritsu Tektronix Fluke and etc.

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>

Mfg. Name	Mfg. Part#	Product	Unit Price	Add To Cart

Tektronix	J17	Tektronix J17 LumaColor	$995.00
Tek J17 Tek LumaColor Photmeter Auto-ranging, Auto zero, RS-232 interface (output only), Wide dynamic range, Interchangeable pre-calibrated heads, Handheld, Large LCD display with backlight.

Tektronix	TSG130A	Tektronix TSG130A / 01 Multiformat Signal Generator	$2,375.00
Component Analog Video Equipment Maintenance The TSG130A is a low cost, multiformat test signal generator tailored for the testing and servicing of Betacam, MII, S-VHS, Hi-8, NTSC and 525/60 GBR video equipment. The 10-Bit digital signal generation and internal architecture allow generation of signals with the accuracy and stability until now available only in higher cost generators. With the TSG130A, you get all the signals you need to test video levels, linearity, frequency response, phase response, clamp performance, chrominance noise, picture monitor alignment, inter-channel timing and more. For convenience in servicing S-VHS and Hi-8 VCRs, the TSG130A provides the NTSC and Y/C outputs simultaneously, with the Y/C outputs available both from BNC connectors and the standard 4-Pin S-connector. Two channels of 1 kHz audio tone are provided on balanced XLR outputs. These phase locked tones are easily identified with the selectable ID pulse in channel one. A dedicated black burst output is available as an option. This output is recommended for the service bench where an external reference signal is required for equipment fault diagnosis and adjustment. All this comes in a package size small enough not to clutter the service bench. And for field servicing, the TSG130A fits nicely in a briefcase with the rest of the necessary service tools. Features & Benefits Low Cost Test Signal Generator Tailored to Service Applications Supports Betacam, MII, S-VHS, Hi-8, GBR, and Composite Formats BNC and S-connector Outputs High Accuracy Test Signal Generation Two Channels of Audio Tone With Channel One Identification Compact and Lightweight Black Burst Output (Option) NTSC Test Signal Outputs

Tektronix	TSG170A	Tektronix TSG170A NTSC Signal Generator	$3,450.00
Features Simple, Effective Test Signal Complement Master Sync Generator with Digital Genlock Separate Timing Controls for Sync and Test Signals Separate SMPTE Color Bars Output with Programmable ID (Opt. 01) Audio Tone Output (Opt. 01) Tape Leader Countdown (Opt. 01) Opt. 1V Signal Set for VM700T Measurements Applications Test Signal and Sync Generation for Broadcast and Post Production Equipment Maintenance The Tektronix TSG170A NTSC Television Generator offers you the test signals you need plus the advantages of master and genlock sync capability. It provides true 10-Bit digital signal accuracy with a full complement of test signals and a stable master sync generator. The rugged, compact TSG170A is designed to support both operational and maintenance requirements. The TSG170A Option 01 provides even more versatility by adding a separate SMPTE color bar generator, programmable identification, audio tone output and tape leader countdown. Test Signal Generator The accuracy and long term stability of the TSG170A test signals are enhanced by its precision digital to analog converter. Each converter is automatically laser trimmed to 12-Bit accuracy. The TSG170A test signal generator's simple front panel controls provide selection of: SMPTE color bars Convergence Pulse and bar with window Multiburst 5-step luminance staircase Luminance ramp Modulated ramp Selectable 10% or 90% APL Bounce 10 and 100 IRE flat fields Red field Multibars NTC 7 composite System test matrix Monitor setup matrix 5 MHz line sweep Multipulse Color bar blanking width is 10.9 盜 to facilitate verification of proper blanking throughout your system.

Tektronix	TSG422	Tektronix TSG422 Digital Component Generator	$4,850.00
Conforms to ITU-R BT. 601/656, EBU Tech 3267, and SMPTE 125M, 259M, and RP165 10- or 8-Bit Signal Generation Parallel Digital Video Test Signal Outputs Four Serial Digital Video Outputs (Opt. 1S) Separate Y, B-Y, R-Y Clock Outputs 525/60 and 625/50 Operation NTSC or PAL Black Burst Outputs Sync Lock to 525/60 or 625/50 Applications D1 VTR and Other 4:2:2 Component Digital Equipment Testing and Maintenance The TSG422 Digital Component Generator is a CCIR 601, 4:2:2 format digital test signal generator. The TSG422 provides all the test signals needed to operate, maintain and evaluate 4:2:2 digital equipment. Analog black burst outputs are provided for equipment synchronization. Test Signal Generator The TSG422 signal generation is 10-Bit in all channels and is clocked at 13.5 MHz for the luminance channel and 6.75 MHz for the color difference channels. Color difference samples are co-sited with the odd numbered luminance samples. The TSG422 signal complement contains general purpose signals plus those tailored specifically to the 4:2:2 environment.

Tektronix	VM100	Tektronix VM100 Video Measurement Set	$3,250.00
The VM100 makes standard NTSC video measurements including the baseband measurements required by new FCC cable system regulations. This makes the VM100 a good choice for CATV engineers charged with meeting those requirements. Measurements are initiated with the push of a button. Once completed, the measurement results may be viewed on the LCD, stored in an internal nonvolatile memory or copied to a serial printer for archival. An internal time clock automatically inserts the time and date of each test for later analysis. Measurement results are averaged for a stable reading even in the presence of a low signal-to-noise ratio. A freeze mode can be used to stop all measurement activity so that intermediate results may be examined. When the input signal lacks suitable synchronizing information, such as inverted sync used for video encryption, an external sync reference input can be used. Features And Benefits Automatically Measures 13 Key Video Parameters Differential Gain Differential Phase Chrominance to Luminance Gain Chrominance to Luminance Phase Frequency Response 2T K-Factor Hum Signal to Noise Group Delay Bar Amplitude Sync Amplitude Burst Amplitude Luminance Non-linearity Verifies Compliance with Industry Standard TV Regulations Automatic "Signal ID" Fast, Accurate Measurements at a Touch of a Button Average Mode for Accurate Results in Low Signal to Noise Freeze Mode Suspends Testing to View Intermediate Results RS-232-C Port for Remote Access or Local Printer Output Simple and Intuitive Interface Internal Memory for Storage of Measurements Results Internal Time Clock for Dating Measurement Results RS-232-C Control Feature Allows Automatic Control of 1740A Series Waveform Monitor Line Select Mode for Viewing of Measured Signal

reseller, reseller channel development, channel development, reseller development, distribution, distribution management, managment, telemarketing, marketing, marketing surveys, surveys, leads, lead qualification, seminar, seminar recruitment, business development

contact webmaster | powered by corezon

All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.

		Go to Our Web Site
		This is our product index page. Please use this keyword searching to narrow down the result.	Advanced Search